POF RENEGADE + PLUS AR-15 5.56/223 16″ Puritan Barrel M-LOK Adjustable Stock 30rd Mag

RENEGADE PLUS

If the Renegade is so great, what do you get in the Renegade Plus?

First, the similarities. You get the same M-LOK compatible Renegade rail, heat sink barrel nut, Dictator 9-position adjustable gas block with straight gas tube, and 16.5” nitride heat treated barrel.

What really sets the Renegade + apart is the Gen 4 POF-USA billet lower receiver and POF-USA Ultimate Bolt Carrier Group. This receiver is completely ambidextrous and includes our flat 3.5lb match grade trigger with KNS Precision anti-walk pins – match ready right out of the box. The magic in the upper receiver is held within our Ultimate Bolt Carrier Group. NP3 coated for maximum protection & reliability, integrated gas key (no screws required) and the POF-USA Roller Cam Pin upgrade installed from the factory.

If there ever was a direct impingement rifle that exceeds all expectations, the Renegade + is it.

BUILT ON OUR GEN 4 LOWER RECEIVER

Ambidextrous Bolt Release with Enhanced Bolt Catch

Ambidextrous Safety Selector

Receiver Tension Screws

Oversized Mag Well Flare

Ambidextrous Recessed Finger Rest

Ambidextrous Magazine Release

Oversized Integrated Trigger Guard w/ Grip Relief

Ambidextrous Bolt Hold Open

Available QD Rear Sling Mount

E2 DUAL-EXTRACTION TECHNOLOGY

POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.

DICTATOR ADJUSTABLE GAS BLOCK

The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.

NITRIDE HEAT TREAT BARREL

Proper gas regulation and lubricated mechanics are nothing without the precision and durability of a quality barrel. Our chrome alloy barrels are machined for absolute accuracy. Our barrels are nitride heat-treated for full corrosion resistance.

TRIPLE PORT MUZZLE BRAKE

Designed to precisely compliment the POF platform our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut..

Ultimate BOLT CARRIER GROUP

Our one piece NP3 plated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action.

Roller Cam Pin

Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.

RENEGADE FOREND

Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.

HEAT SINK BARREL NUT

Heat is an enemy to firearms. The patented heat sink barrel nut is one of the most significant innovations in battling overheating. It completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. This also adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.

ANTI-TILT BUFFER TUBE

Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes

DROP IN FLAT TRIGGER SYSTEM

The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.

TOMAHAWK AMBIDEXTROUS CHARGING HANDLE

How can you say it’s a premium rifle without complete ambidextrous features? That’s where the Tomahawk Charging Handle comes in. Big enough for positive traction and small enough to stay out of the way, the Tomahawk rounds out the ambidextrous controls for the Renegade Plus.

• Category : Rifles Centerfire Tactical
• Action : Semi-Automatic
• Caliber : 223 Remington/5.56 NATO
• Barrel Length : 16.5″
• Capacity : 30+1
• Trigger : Match Grade
• Safety : Lever
• OAL : 33.5″
• Weight : 6.4 lbs
• Stock Description : Synthetic Black
• Metal Finish : Black Hard Coat Anodized